Busbar Ce Shear Bend Cut Machine

DESAN 3 in 1 Busbar Machine:

Bending structure

The open-type bending structure ruler is designed to be easy to operate, reinforced, durable, and convenient for loading and unloading.

Two-layer slab

The thickness of the second floor of the open equipment is 60mm, which ensures the stability of the bending unit.

Punching unit

The punching turntable chooses eight mold positions, six mold positions, and four mold positions. The integral turntable improves the concentricity of the mold, prolongs the service life and saves the time of mold change.

DESAN 3 in 1 Busbar Machine

1. Punching turntable can choose two specifications of 400mm/450mm. The material of punching turntable is ductile iron, which is invariant. It is processed by precision machining center to ensure the precision size. The appearance is nickel-plated, which is beautiful and does not fade.

2. The punches of the punching die are made of 12 molybdenum and vanadium through high temperature quenching materials, which are sturdy and durable.

The punching unit is equipped with a bidirectional gear ruler positioning to make punching more precise; in addition to laser light positioning (magnetic suction cup type), positioning pin positioning, sample punch positioning and other positioning methods can save punching time and improve Work efficiency can be more precise.

The punching range can reach φ4.3-φ30. Round holes, waist holes, square holes and chamfers can be processed. The punching unit will be equipped with 8 sets of punching dies of common specifications.

DESAN 3 in 1 Busbar Machine

Shear unit

1. The shearing station adopts a double-column shearing structure, and the shearing cylinder is increased to 50 tons, and the shearing force is greater, and burrs are not easy to appear.

2. The cutting unit adopts the universal double-knife type cutting, the cutting edge is flat and there is no burr

Bending unit

The bending unit is equipped with corresponding molds to perform operations such as flat bending, vertical bending, U-bending, embossing, flattening, and pressing of cable joints.

Jinan Deshang CNC equipment Co., Ltd.,

The PLC system is a Siemens system, and the bending accuracy: accuracy ±1°, repeat ±0.5°; and has storage memory and error compensation functions to ensure bending accuracy and angle consistency.

1. The equipment motor is a Nanjing Shunbo brand motor, 100% pure copper motor, which has better conductivity than ordinary motors, much better stability than ordinary motors, and higher cost.

2. The oil pump is Taiwan Xinhong HYDROMAX gear pump. The advantages of the gear pump are simple structure, convenient maintenance, and insensitive to oil pollution. Our equipment does not require very high pressure, so it is a good choice to choose a gear pump.

3. The pump station is equipped with a pressure gauge to adjust the pressure to prevent the pressure from being too high or too low;

1. The equipment frame is made of 45# steel, which is strong and durable;

2. The oil tank adopts a sealed design, which can prevent foreign matter from falling into the oil tank, causing pollution to the hydraulic oil, and better protecting the equipment from damage.

3. The button switches, contactors, and relays on the equipment are French Schneider accessories, safe and durable, and quality guaranteed.

1. Independent motor: 3 stations operate at the same time, avoiding motor damage caused by overload.

2. Power-off protection: real-time monitoring of machine operation, automatic power-off protection of motors and other important components.

3. Durability: The electronic components of Siemens, Schneider and other big brands are durable and avoid the aging of the circuit and cause short circuit.

4: Safety protective cover: to prevent the machine from hurting fingers or other objects during the operation of the machine.

5: Urgent stop: in case of emergency, stop immediately.

Jinan Deshang CNC equipment Co., Ltd.,

Q: How to get a accurate quotation from us?

A: Please provide us the details of material, max thickness and max width.

Q: Can you do OEM service?

A: Yes, we can.

Q: What's the shipping cost from china to your country?

A: We have reliable shipping agent to insure the safe convenient and time delivery.

Q: Do you accept LC payment?

A: Yes,TT, LC and OA. 

40% T/T deposit, 60% balance be paid before loading after good ready.

Q: How to operate this machine?

A: Video line of our factory or we send you the video directly.

Q: What about commissioning service?

A: We can offer commissioning service, the buyer need to afford plane tickets.

Hot Tags: 3 in 1 busbar machine, suppliers, manufacturers, first price, OEM factory, for sale, Auto CNC Busbar Bending Machine, Punching Die, Hydraulic Busbar Cutting Punching Bending Machine, Bending Die, Copper Bar Square Hole Dies, Hydraulic Busbar Punching Machine