How To Operate The Copper Bar Processing Machine Correctly?

No matter what type of machine it is, we must follow certain operating steps when operating it, in order to ensure the normal operation of the machine. For copper bar processing machines, understanding their correct operation is very important. So, how to operate the copper bar processing machine correctly? Let me explain to you.

1. Operators should operate according to the operating manual of the copper bar processing machine, and should not violate regulations to cause damage or damage to personnel and equipment. The molds and accessories of the copper bar processing machine should be kept intact, and familiar with the structure, performance, and operating methods of the machine.

2. Installation, debugging, or disassembly of molds must be carried out by personnel familiar with the machine in accordance with the prescribed procedures. When the machine is running, do not place your hands or part of your body between the upper and lower molds to avoid accidents.

3. The sharpness of the blades and die blades should be regularly checked. If the blades become dull, they should be repaired or replaced in a timely manner. The oil should be kept clean and the oil circuit should be unobstructed, and lubricating oil should be added to the moving parts of each unit every shift. It is necessary to ensure flexible movement and correct position of electrical and hydraulic components. If any abnormal phenomenon is found, it must be immediately stopped for inspection. If it is not working, turn off the working buttons of each unit and turn off the power switch on the operation panel.

The operators of the copper bar processing machine must be proficient in operation to ensure that the copper bar processing machine can provide us with assistance and extend the service life of the copper bar processing machine.