How To Operate The Bending Unit Of A CNC Busbar Processing Machine

The busbar processing machine has three processing units: shearing, punching and bending, the main function is to process different specifications of copper and aluminium busbars.
The main function of the machine is to process different specifications of copper and aluminium busbars, which can be sheared, punched and bent easily and quickly with the corresponding processing unit.
By changing the moulds, it is also possible to complete a variety of different processes such as flat bending, vertical bending, embossing, flattening, twisting twists and pressing cable joints.
The machine can also be used for a variety of different processes such as flat bending, vertical bending, embossing, flattening, twisting and twisting, and pressing cable connectors.

1、The busbar processing machine must be managed by a person in charge, and the operator must be familiar with the safety operating procedures of the machine.

2, busbar processing machine using the lubricating oil, oil level check before operation, such as oil
The surface is lower than the warning line, to refuel before operation, each refueling must be added to the oil surface indication line.

3、Before operating the busbar processing machine, add lubricant to each active part, start the oil pump and observe the direction of rotation of the oil pump. whether the direction of rotation of the oil pump is in line with the direction indicated on the oil pump nameplate, and let the oil pump airlift for two minutes before starting work.

4, bus bar bending, according to the size of the bus bar specifications, different uses in accordance with the "bending force selection table" to select the bending Bending force. In the case of meeting the use of small bending force as far as possible, because the bending force with a large, the production of bus bar will be accidentally injured bus bar.

5、When bending the bus bar, pay attention to the direction of movement and position of the bus bar to prevent the bus bar from being injured during the process. and human body;