Analysis Of The Usage Methods For Each Unit Of CNC Busbar Processing Machine

Jinan Deshang CNC Equipment Co., Ltd. is a manufacturer of busbar processing machines.
The use of the punching device and die change method of Deshang CNC busbar processing machine:
1. Before the punching process, the moving part of the machine must be oiled.
2. During the punching process, it is necessary to better keep the material being processed smooth.
3. The punching unit can withstand large forces directly, but the die may fail when subjected to deflective loads. (Prohibited: Punching oval holes with a round die to avoid personal injury and die damage)
4. Note: Material defects can also lead to damage to the die. 5. When the punching process is finished and the machine body rises, the material being processed should be relatively balanced.
6. Select a suitable die when carrying out the punching process.
7. It is important to remain on the work table when punching.
8. Check the dimensions of the upper and lower dies.
Die change method for punching dies:
1. Before changing the die, remove the punching unit die pin.
2. Remove the upper die assembly and place the required upper die in the correct orientation.
3. Take out the lower die and replace it with the one that is compatible with the upper die.
4. Always use the "push button switch" or "foot switch" and "up" and "down" on the screen to check the alignment of the upper and The alignment of the upper and lower dies must be checked using the "push button switch" or "foot switch" and "up" and "down" on the screen.